Journal Paper

1. "Novel Cardiovascular Stent Based on Hibiscus-Aestivation-Inspired Auxetic Unit Cell"
   Sadegh Ghofrani, Ali Abouei Mehrizi, Vahid Nasrollahi, Stefan Dimov
   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 277, No 1, 2024
2. "Micromixer research trend of active and passive designs"
   Sajad Razavi Bazaz, Ali Sayyah, Amir Hossein Hazeri, Robert Salomon, Ali Abouei Mehrizi, Majid Ebrahimi Warkiani
   CHEMICAL ENGINEERING SCIENCE, Vol. 293, No 1, 2024
3. "Mechanical investigation of novel biomimetic cells with hybrid porosities for orthopedic applications"
   Sahand Samimi, Ali Abouei Mehrizi, Amir Asadi, Dorna Hedayat
   Journal of Mechanics in Medicine and Biology, Vol. 23, No 6, 2023
4. "Encapsulation of Frankincense Essential Oil by Microfluidic and Bulk Approaches: A Comparative Study"
   Pouria Taherian, Mohammad Sadegh Nourbakhsh, Ali Abouei Mehrizi, Mohadeseh Hashemi
   FIBERS AND POLYMERS, Vol. 23, No 10, pp.2970-2980, 2022
5. "Machine Learning-Aided Microdroplets Breakup Characteristic Prediction in Flow-Focusing Microdevices by Incorporating Variations of Cross-Flow Tilt Angles"
   Bahram Talebjedi, Ali Abouei Mehrizi, Behnam Talebjedi, Seyed Sepehr Mohseni, Nishat Tasnim, Mina Hoorfar
   LANGMUIR, Vol. 38, No 34, pp.10465-10477, 2022
6. "Modification of hexachiral unit cell to enhance auxetic stent performance"
   Amir Asadi, Dorna Hedayat, Sadegh Ghofrani, Ali Abouei Mehrizi, Ghasem Shadalooyi, Javad Kadkhodapour, Ali Pourkamali Anaraki
   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 19, No 1, pp.1-15, 2022
7. "Advances in MEMS and Microfluidics‐Based Energy Harvesting Technologies"
   M A Parvez Mahmud, Sajad Razavi Bazaz, Soroush Dabiri, Ali Abouei Mehrizi, Mohsen Asadnia, Majid Ebrahimi Warkiani, Zhong Lin Wang
   Advanced Materials Technologies, Vol. 7, No 7, 2022
8. "Composite Microgels for Imaging-Monitored Tracking of the Delivery of Vascular Endothelial Growth Factor to Ischemic Muscles"
   Hamideh Basiri, Seyed Sepehr Mohseni, Ali Abouei Mehrizi, Alireza Rajabnejadkeleshteri, Azadeh Ghaee, Mehdi Farokhi, Eugenia Kumacheva
   BIOMACROMOLECULES, Vol. 22, No 12, pp.5162-5172, 2021
9. "Simultaneous Modeling of Young’s Modulus, Yield Stress, and Rupture Strain of Gelatin/Cellulose Acetate Microfibrous/Nanofibrous Scaffolds Using RSM"
   Alireza Barazesh, Mahdi Navidbakhsh, Ali Abouei Mehrizi, Mojtaba Kusha, Sajad Razavi Bazaz, Tianduo Li
   FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY, Vol. 9, No 1, pp.1-16, 2021
10. "Investigation of porous cells interface on elastic property of orthopedic implants: Numerical and experimental studies"
    Sadati Mahzad, Sadegh Ghofrani, Ali Abouei Mehrizi
    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 120, No 1, 2021
11. "Preparation of microfluidic-based pectin microparticles loaded carbon dots conjugated with BMP-2 embedded in gelatin-elastin-hyaluronic acid hydrogel scaffold for bone tissue engineering application"
    Alireza Rajabnejadkeleshteri, Hamideh Basiri, Seyed Sepehr Mohseni, Mehdi Farokhi, Ali Abouei Mehrizi, Fathollah Moztarzadeh
    International Journal of Biological Macromolecules, Vol. 184, No 1, pp.29-41, 2021
12. "Volume-preserving strategies to improve the mixing efficiency of serpentine micromixers"
    Sajad Razavi Bazaz, Amir Hossein Hazeri, Omid Rouhi, Ali Abouei Mehrizi, Dayong Jin, Majid Ebrahimi Warkiani
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 30, No 11, pp.1-12, 2020
13. "Obstacle‑free planar hybrid micromixer with low pressure drop"
    Sajad Razavi Bazaz, Hoseyn Amiri, Steven Vasilescu, Ali Abouei Mehrizi, Dayong Jin, Morteza Miansari, Majid Ebrahimi Warkian
    MICROFLUIDICS AND NANOFLUIDICS, Vol. 24, No 8, 2020
14. "Carbon Dots Conjugated with Vascular Endothelial Growth Factor for Protein Tracking in Angiogenic Therapy"
    Hamideh Basiri, Ali Abouei Mehrizi, Azadeh Ghaee, Mehdi Farokhi, Mahshid Chekini, Eugenia Kumacheva
    LANGMUIR, Vol. 36, No 11, pp.2893-2900, 2020
15. "Hyaluronic acid/ carboxylated Zeolitic Imidazolate Framework film with improved mechanical and antibacterial properties"
    Atiye Sadat Abednejad, Azadeh Ghaee, Jhamak Nourmohammadi Kouhanestani, Ali Abouei Mehrizi
    CARBOHYDRATE POLYMERS, Vol. 222, No 115033, 2019
16. "Hydrogels Based on Cellulose and its Derivatives: Applications, Synthesis, and Characteristics"
    Sadegh Ghorbani, Hossein Eyni, Sajad Razavi Bazaz, Hojjatollah Nazari, Leila Salari Asl, Hamid Zaferani, Vali Kiani, Ali Abouei Mehrizi, Masoud Soleimani
    POLYMER SCIENCE SERIES A, Vol. 60, No 6, 2018
17. "A hybrid micromixer with planar mixing units"
    Sajad Razavi Bazaz, Ali Abouei Mehrizi, Sadegh Ghorbani, Steven Vasilescu, Mohsen Asadnia, Majid Ebrahimi Warkiani
    RSC Advances, Vol. 8, No 58, pp.33103-33120, 2018
18. "Multi-criteria optimization of curved and baffle-embedded micromixers for bio-applications"
    Mohammadreza Rasouli, Ali Abouei Mehrizi, Ali Lashkaripour, Masoud Goharimanesh, Sajad Razavi Bazaz
    Chemical Engineering and Processing-Process Intensification, Vol. 132, No 8, 2018
19. "An adaptive neural-fuzzy approach for microfluidic droplet size prediction"
    Ali Lashkaripour, Masoud Goharimanesh, Ali Abouei Mehrizi, Douglas Densmore
    MICROELECTRONICS JOURNAL, Vol. 78, No 8, pp.73-80, 2018
20. "Size-Controlled Droplet Generation in a Microfluidic Device for Rare DNA Amplification by Optimizing its Effective Parameters"
    Ali Lashkaripour, Ali Abouei Mehrizi, Masoud Goharimanesh, Mohammadreza Rasouli, Sajad Razavi Bazaz
    Journal of Mechanics in Medicine and Biology, Vol. 18, No 1, 2018
21. "A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA Strands"
    Mina Mollajan, Sajad Razavi Bazaz, Ali Abouei Mehrizi
    Journal of Applied Fluid Mechanics, Vol. 11, No 1, pp.21-29, 2018
22. "A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA"
    Mina Mollajan, Sajad Razavi Bazaz, Ali Abouei Mehrizi
    Journal of Applied Fluid Mechanics, Vol. 11, No 1, pp.21-29, 2018
23. "Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing"
    Ali Lashkaripour, Ali Abouei Mehrizi, Mohammad Reza Rasouli, Masoud Goharimanesh
    Journal of computational applied mechanics, Vol. 46, No 2, pp.167-175, 2015
24. "Plastic deformation and compressive mechanical properties of hollow sphere aluminum foams produced by space holder technique"
    Javad Kadkhodapour, Hossein Montazerian, Mohammad Samadi, Siegfried Schmauder, Ali Abouei Mehrizi
    MATERIALS & DESIGN, Vol. 83, No 4, pp.352-362, 2015
25. "Numerical Study on Low Reynolds Mixing of T-shaped Micro-Mixers with Obstacles"
    Mohammad Reza Rasouli, Ali Abouei Mehrizi, Ali Lashkaripour
    Transport Phenomena in Nano and Micro Scales, Vol. 3, No 2, pp.68-76, 2015
26. "Electrospinning of PVA/chitosan nanocomposite nanofibers containing gelatin nanoparticles as a dual drug delivery system"
    Shahrzad Fathollahipour, Ali Abouei Mehrizi, Azadeh Ghaee, Mojtaba Kusha
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, Vol. 7, No 105, pp.2021-2030, 2015
27. "Fractional Order PID Controller for Diabetes Patients"
    Masoud Goharimanesh, Ali Lashkaripour, Ali Abouei Mehrizi
    Journal of computational applied mechanics, Vol. 46, No 1, pp.69-76, 2015
28. "Application of artificial palpation in vascular surgeries for detection of peripheral arterial stenosis"
    Ali Abouei Mehrizi, Majid Moini, Elnaz Afshari, Javad Kadkhodapour, Abdollah Sadjadian, Siamak Najarian
    JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY, Vol. 38, No 4, pp.169-178, 2014
29. "Investigating Effective Parameters in Tactile Determination of Artery included in Soft Tissue by FEM"
    Ali Abouei Mehrizi, Siamak Najarian, Majid Moini, Pedram Pahlavan, Javad Dargahi
    AUT Journal of Modeling and Simulation, Vol. 44, No 1, 2009
30. "Modeling of Tactile Detection of an Artery in a Soft Tissue by Finite Element Analysis"
    Ali Abouei Mehrizi, Siamak Najarian, Majid Moini
    AUT Journal of electrical Engineering, Vol. 41, No 2, 2009
31. "Paper-based Microfluidics for Biomedical Applications"
    Mahdi Mehri, Ali Abouei Mehrizi
    mechanical engineering, Vol. 29, No 1, 2020
32. "Evaluation of Young’s Modulus and Poisson’s Ratios of Diamond Porous Structure for Use in Orthopedic Implant by Finite Element Method"
    Iman Rafati, Ali Abouei Mehrizi
    Mechanical Engineering modares, Vol. 19, No 5, 2019
33. "Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions"
    Hamideh Basiri, Ali Abouei Mehrizi, Farhad Bakhshi
    Mateials and advanced technology journal, Vol. 6, No 4, pp.1-10, 2018

Conference Paper

1. "Exploring the Design and Structural Analysis of Innovative Auxetic Coronary Stent"
   Mohaddese Shirdel, Ali Abouei Mehrizi
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
2. "A 3D passive micromixer for synthesizing nanoparticle with bio-applications: Computational study"
   Amirhossein Khazaei, Ali Abouei Mehrizi
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
3. "Simulation of Suture Production by Microfluidic Spinning to Optimise Flow Rates and Channel Length"
   Shahbaldin Mahravani Behbahani, Ali Abouei Mehrizi, Amirhossein Khazaei, Azadeh Ghaee
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
4. "Design and Simulation of an Oxygen Gradient Generator for Heart-on-a-Chip"
   Mahya Mosayebzade, Sogol Fathi, Ali Abouei Mehrizi
   2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), 2023
5. "The effect of Micropillar Geometry on Shear Stress Gradient in Endothelium-on-a-Chip"
   Mahya Mosayebzade, Parsa Safaeian, Ali Abouei Mehrizi
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
6. "A Review of Surface Plasmon Resonance (SPR) Biosensors for the Detection of Breast Cancer Biomarkers"
   Mahsa Aghajanpour, Faezeh Rezaei, Ali Abouei Mehrizi
   1st International Congress of Biomarkers, 2023
7. "A Simulation study of β-Amyloid Aggregation in A Variable Height Capillary Microfluidic Device for Early Diagnosis of Alzheimer's Disorder"
   Faezeh Rezaei, Mahsa Aghajanpour, Ali Abouei Mehrizi
   1st International Congress of Biomarkers, 2023
8. "Comparison of the Pullout Strength of Auxetic Orthopedic Screws"
   Mohammad Firouzmakan, Ali Abouei Mehrizi, Sadegh Ghofrani
   The 30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
9. "A Comparative Study on Auxetic and Non-Auxetic Heel Pads for Plantar Heel Pains"
   Dorna Hedayat, Mohaddese Shirdel, Ali Abouei Mehrizi
   The Second International Conference on Motion Analysis (ICOMA 2021), 2021
10. "Effect of increasing porosity as drug reservoirs for local drug delivery in an auxetic stent"
    Mohaddese Shirdel, Sadegh Ghofrani, Ali Abouei Mehrizi
    2021 28th National and 6th International Iranian Conference on Biomedical Engineering (ICBME), 2021
11. "Effect of hydroxyapatite fiber’s shape on mechanical properties of calcium phosphate cement"
    Sadegh Ghofrani, Ali Abouei Mehrizi
    2020 27th National and 5th International Iranian Conference on Biomedical Engineering (ICBME), 2020
12. "Flow rate controlling by capillary micropumps in open biomicrofluidic devices"
    Sogol Fathi, Seyed Sepehr Mohseni, Ali Abouei Mehrizi
    2020 27th National and 5th International Iranian Conference on Biomedical Engineering (ICBME), 2020
13. "Increasing Efficiency of Micromixing Within a Biomicrofluidic Device Using Acceleration, Deceleration Technique"
    Sajad Razavi Bazaz, Amirhossein Hazeri, Ali Abouei Mehrizi
    24th National & 2rd International Iranian Conference on Biomedical Engineering, 2017
14. "Evaluation of Nanofiber PLA Scaffolds Using Dry- and Wet-Electrospinning Methods"
    Sadegh Ghorbani, Sajad Razavi Bazaz, Majid Ebrahimi Warkiani, Masoud Soleimani, Ali Abouei Mehrizi
    24th National & 2rd International Iranian Conference on Biomedical Engineering, 2017
15. "Optimal Design of a Biodegradable Polymeric Screw for Fractured Finger Bone"
    Shima Doorandish Yazdi, Ali Abouei Mehrizi
    24th National & 2rd International Iranian Conference on Biomedical Engineering, 2017
16. "Ionic Gelation Synthesis of Alginate Nanoparticles in a Microfluidic Microchannel with Different Flow Rates"
    Laleh Mahmoodi, Sajad Razavi Bazaz, Javad Mohammadnejad Arough, Ali Abouei Mehrizi, Masoud Soleimani, Massoud Saidijam
    25th Annual International Conference on Mechanical Engineering (ISME 2017), 2017
17. "A Novel Microfluidic Design for Blood Plasma Separation"
    Sajad Razavi Bazaz, Ali Abouei Mehrizi, Alireza Zabihi Hesari
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME, 2016
18. "Size-Tunable Alginate Nanoparticles Synthesis Using T-Junction Microfluidic Chip"
    Laleh Mahmoodi, Sajad Razavi Bazaz, Javad Mohammadnejad Arough, Ali Abouei Mehrizi, Masoud Soleimani
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME), 2016
19. "A Novel Microfluidic Two-Level Droplet PCR for DNA Amplification"
    Mina Mollajan, Ali Abouei Mehrizi, Sajad Razavi Bazaz
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME), 2016
20. "Increasing the efficiency of microfluidic micromixer with gaps and baffles using design of experiments based on Taguchi method"
    Sajad Razavi Bazaz, Ali Abouei Mehrizi, Seyyed Morteza Javid, Mohammad Passandidehfard
    The Canadian Society for Mechanical Engineering (CSME) International Congress 2016, 2016
21. "Numerical Study on Effects of Curves and Ridges on Mixing of Passive Micro-Mixers"
    Mohammad Reza Rasouli, Ali Abouei Mehrizi, Masoud Goharimanesh
    First National Congress on Microfluidics and its Application in Medicine and Engineering, 2016
22. "Effect of synthesized biomimetic nano-hydroxyapatite on remineralization of enamel lesion and prevention of dental caries"
    Hamideh Basiri, Ali Abouei Mehrizi, Farhad Bakhshi, Sahba Mobini
    Proceedings of 5th International Congress on Nanoscience & Nanotechnology (ICNN2014), 2014
23. "Synthesis of biomimetic nanostructured apatite for dental remineralization"
    Hamideh Basiri, Ali Abouei Mehrizi, Farhad Bakhshi
    The 1st Middle East & The 6th Iranian Controlled Release Conference 2014, 2014
24. "Design, Synthesis and Characterization of Gelatin Based Microspheres for Controlling the Release Rate of Erythromycin Antibiotic"
    Susan Maziarfar, Shahrzad Fathollahipour, Ali Abouei Mehrizi
    The 1st Middle East & The 6th Iranian Controlled Release Conference 2014, 2014
25. "Synthesis and Characterization of Erythromycin Loaded PVA-Corn Starch Hydrogel Wound Dressing"
    Shahrzad Fathollahipour, Susan Maziarfar, Ali Abouei Mehrizi, Javad Tavakoli
    The 1st Middle East & The 6th Iranian Controlled Release Conference 2014, 2014
26. "Investigation of fluid flow in paper-based microfluidics with design of various experiments and changes in paper structure"
    Mahdi Mehri, Ali Abouei Mehrizi, Mohamad Ajodanniyan
    2020 27th National and 5th International Iranian Conference on Biomedical Engineering (ICBME), 2020
27. "Control of cubic unit cell elastic modulus for medical applications based on changing of its Porosity"
    Sahand Samimi, Ali Abouei Mehrizi, Amir Asadi
    The First National Conference on Computational and Experimental Mechanics, 2019
28. "Design, fabrication and evaluation of gradient porous implant with an elastic modulus same as bone tissue"
    Amirhosein Ildorom, Ali Abouei Mehrizi
    The First National Conference on Computational and Experimental Mechanics, 2019
29. "Computational and Laboratory Study of Kelvin Cell Gradient Porous Structure for Orthopedic Applications"
    Sadati Mahzad, Ali Abouei Mehrizi
    25th National and 3rd International Iranian Conference of Biomedical Engineering, 2018
30. "Optimization of Kelvin Unit Cell to Match with Elastic Properties of Human Bone"
    Iman Rafati, Ali Abouei Mehrizi, Mahzad Sadati, Javad Kadkhodapour
    2016 23rd Iranian Conference on Biomedical Engineering and 2016 1st International Iranian Conference on Biomedical Engineering (ICBME), 2016
31. "Geometrical Optimization for Common Passive Micromixer by Taguchi Method"
    Seyed Mohsen Vaziri, Ali Abouei Mehrizi
    First National Congress on Microfluidics and its Application in Medicine and Engineering, 2016
32. "Simulation of Droplet Generation Using Flow-focusing for Micro PCR on a chip"
    Mina Mollajan, Ali Abouei Mehrizi
    First National Congress on Microfluidics and its Application in Medicine and Engineering, 2016
33. "Modeling of Degradation Process of Biodegradable Polymeric Orthopedic Devices"
    Shima Doorandish Yazdi, Ali Abouei Mehrizi
    Second National Conference of Engineering Sciences, 2015
34. "synthesized biomimetic nano-hydroxyapatite on remineralization of enamel lesion"
    Hamideh Basiri, Ali Abouei Mehrizi, Farhad Bakhshi
    The National Congress on Nanomed Application in Medical Science, 2014