مقالات علمی چاپ شده در مجلات

1. "Fracture assessment of blunt V-notched 3D-printed ABS: Proposing a new specimen for testing and different criteria for prediction"
   Alireza Torabi, Amin Ghanbari, Naghdali Choupani, Majid Reza Ayatollahi
   THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 134, No 104742, 2024
2. "Translaminar fracture toughness characterisation for a glass fibre/ polyamide 6 laminated composite by a novel approach based on fictitious material concept"
   Alireza Torabi, Andrea Carpinteri, Karolina Glowacka, Sobhan Mohammadi, Camilla Ronchei, Daniela Scorza, Andrea Zanichelli, Sabrina Vantadori
   COMPOSITE STRUCTURES, Vol. 351, No 118605, 2024
3. "Tensile fracture prediction of 3D-printed V-notched PLA specimens: Application of VIMC-MEMC in conjunction with brittle fracture criteria"
   Alireza Torabi, Sahel Shahbaz, Majid Reza Ayatollahi
   ENGINEERING FRACTURE MECHANICS, Vol. 310, No 110497, 2024
4. "Tensile fracture of blunt V-notches in rectangular plates additively manufactured from Acrylonitrile Butadiene Styrene with different raster angles"
   Amin Ghanbari, Majid Reza Ayatollahi, Naghdali Choupani, Alireza Torabi
   ENGINEERING FAILURE ANALYSIS, Vol. 164, No 108670, 2024
5. "A simple, fast, and robust criterion for predicting fracture load and crack growth path in notched elastoplastic plates under mixed-mode loading"
   Mohammad Hasaninia, Alireza Torabi, Bahador Bahrami
   THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 133, No 104575, 2024
6. "Determining the Cohesive Length of Rock Materials by Roughness Analysis"
   Saeed Aligholi, Manoj Khandelwal, Alireza Torabi
   GEOSCIENCES, Vol. 14, No 176, 2024
7. "Does VIMC-FMC work well on highly ductile bimetal joints? An investigation on mixed mode I/II fracture of AA1050/Cu bimetal weakened by U-notches"
   Mohammad Amin Motamedi, Alireza Torabi, Ramin Hashemi
   ENGINEERING FRACTURE MECHANICS, Vol. 306, No 110246, 2024
8. "Notch strength evaluation for highly ductile Al/Cu bi-metal fabricated by the roll-bonding technique under pure mode I and pure mode II loading conditions"
   Mohammad Amin Motamedi, Alireza Torabi, Ramin Hashemi
   THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 131, No 104435, 2024
9. "Fracture assessment of U-notched diagonally loaded square plates additively manufactured from ABS with different raster orientations"
   Alireza Torabi, Sahel Shahbaz, Majid Reza Ayatollahi
   ENGINEERING STRUCTURES, Vol. 292, No 116537, 2023
10. "Quantifying the cohesive strength of rock materials by roughness analysis using a domain based multifractal framework"
    Saeed Aligholi, Alireza Torabi, Manoj Khandelwal
    International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 170, No 105492, 2023
11. "A new strategy for predicting fracture of U-notched specimens made of Al-6061-T6 and Al-5083 using extended finite element method"
    Pedram Bagheri, Alireza Torabi, Bahador Bahrami
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 9, No 46, pp.1-13, 2023
12. "Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading"
    Alireza Torabi, Moslem Mirzavand, Behnam Saboori, Sergio Cicero
    MATERIALS, Vol. 16, No 16051757, 2023
13. "Mixed Mode Fracture Investigation of Rock Specimens Containing Sharp V-Notches"
    Ali Arabnia, Javad Akbardoost, Sergio Cicero, Alireza Torabi
    MATERIALS, Vol. 15, No 15248779, 2022
14. "Mixed mode I-III fracture resistance of stainless steel 316L weakened by V-notches with end holes"
    Alireza Torabi, Hossein Talebi, Majid Reza Ayatollahi, Michal Petru
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 122, No 103574, 2022
15. "On the use of Brazilian disk specimen for measuring mixed-mode I/II translaminar fracture toughness of notched glass/epoxy composite laminates: A comprehensive study"
    Alireza Torabi, Bahador Bahrami, Mohammad Amin Motamedi, Hossein Hasanvand
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 121, No 103541, 2022
16. "Determination of Translaminar Notch Fracture Toughness for Laminated Composites Using Brazilian Disk Test"
    Alireza Torabi, Mohammad Amin Motamedi, Bahador Bahrami, Meghdad Noushak, Sergio Cicero, Jose Alberto Alvarez
    Polymers, Vol. 14, No 3246, 2022
17. "Providing a virtual material for simple estimation of fracture in U-notched highly orthotropic specimens with nonlinear behavior under mixed mode I/ II loading"
    Pedram Bagheri, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 121, No 103485, 2022
18. "Size Effect on Mode I Fracture Resistance of Polymeric Rounded-Tip V-Notched Specimens Using the Modified Point Stress Criterion"
    Mahdi Jabbari, Javad Akbardoost, Alireza Torabi
    JOURNAL OF ENGINEERING MECHANICS, Vol. 148, No 7, 2022
19. "Tensile-Tearing Fracture Analysis of U-Notched Spruce Samples"
    Alireza Torabi, Sobhan Mohammadi, Behnam Saboori, Majid Reza Ayatollahi, Sergio Cicero
    MATERIALS, Vol. 15, No 3661, 2022
20. "A two-level strategy for simplification of fracture prediction in notched orthotropic samples with nonlinear behavior"
    Mohammad Hasaninia, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 120, No 103388, 2022
21. "Experimental Verification of the Averaged Strain Energy Density Criterion for Brittle Fracture in Blunt V-Notches under Pure Compression"
    Alireza Torabi, Majid Reza Ayatollahi, Filippo Berto, Seyyed Mohammad Javad Razavi
    STRENGTH OF MATERIALS, Vol. 54, No 1, 2022
22. "A Modified Mean Stress Criterion for Considering Size Effects on Mode I Fracture Estimation of Rounded-Tip V-Notched Polymeric Specimens"
    Alireza Torabi, Mahdi Jabbari, Javad Akbardoost, Sergio Cicero
    Polymers, Vol. 14, No 1491, 2022
23. "Translaminar notch fracture toughness expressions for composite laminates"
    Alireza Torabi, Ebrahim Pirhadi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 119, No 103332, 2022
24. "U-notch fracture in additively manufactured ABS specimens under symmetric three-point bending"
    Sahel Shahbaz, Majid Reza Ayatollahi, Michal Petru, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 119, No 103318, 2022
25. "A new methodology inspired from the Theory of Critical Distances for determination of inherent tensile strength and fracture toughness of rock materials"
    Saeed Aligholi, Laurent Ponson, Alireza Torabi, Qianbing Zhang
    International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 152, No 105073, 2022
26. "Elastoplastic fracture analysis of thin notched AA7075-AA2024 dissimilar friction-stir-welded plates under mixed mode I/II loading"
    Alireza Torabi, Behnam Saboori, Moslem Mirzavand
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. xxxx, pp.1-14, 2022
27. "Fracture testing and estimation of critical loads in a PMMA-based dental material with nonlinear behavior in the presence of notches"
    Alireza Torabi, Sahel Shahbaz, Sergio Cicero, Majid Reza Ayatollahi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 118, No 103282, 2022
28. "Investigation of notch effects on load-bearing capacity of AA7075-AA7075 friction-stir welded joints under mixed mode I/II loading"
    Alireza Torabi, Moslem Mirzavand, Behnam Saboori
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 118, No 103252, 2022
29. "Compressive fracture analysis of U-notched specimens made of porous graphite reinforced by aluminum particles"
    Alireza Torabi, Kazem Hamidi, Behnam Shahbazian
    DIAMOND AND RELATED MATERIALS, Vol. 120, No 108613, 2021
30. "A Methodology to Determine the Effective Plastic Zone Size Around Blunt V-Notches under Mixed Mode I/II Loading and Plane-Stress Conditions"
    Alireza Torabi, Behnam Shahbazian, Mirmilad Mirsayar, Sergio Cicero
    Metals, Vol. 11, No 1042, 2021
31. "Free vibration analysis of a laminated beam using dynamic stiffness matrix method considering delamination"
    Shahrokh Shams, Alireza Torabi, Mahdi Fatehi Narab, Mohammad-ali Amiri Atashgah
    THIN-WALLED STRUCTURES, Vol. 166, No 107952, 2021
32. "Extension of the Equivalent Material Concept to Compressive Loading: Combination with LEFM Criteria for Fracture Prediction of Keyhole Notched Polymeric Samples"
    Alireza Torabi, Kazem Hamidi, Behnam Shahbazian, Sergio Cicero, Filippo Berto
    Applied Sciences-Basel, Vol. 11, No 4138, pp.1-16, 2021
33. "STRAIN ENERGY DENSITY-PREDICTED BRITTLE FRACTURE OF U-NOTCHED COMPONENTS UNDER COMBINED TENSION/TEAR LOADING"
    Alireza Torabi, Behnam Saboori, Filippo Berto, Seyyed Mohammad Javad Razavi
    STRENGTH OF MATERIALS, Vol. 53, No 1, pp.1-10, 2021
34. "Critical Load Prediction in Notched E/Glass–Epoxy-Laminated Composites Using the Virtual Isotropic Material Concept Combined with the Average Strain Energy Density Criterion"
    Marcos Sanchez, Sergio Cicero, Alireza Torabi, Majid Reza Ayatollahi
    Polymers, Vol. 13, No 1057, 2021
35. "Mixed mode I/II crack propagation in stainless steel 316L sheets by large plastic deformations: Prediction of critical load by combining LEFM with fictitious material concept"
    Alireza Torabi, Hadi Sadeghian, Majid Reza Ayatollahi
    ENGINEERING FRACTURE MECHANICS, Vol. 247, No 107657, 2021
36. "Notch Fracture in Polymeric Specimens under Compressive Stresses: The Role of the Equivalent Material Concept in Estimating the Critical Stress of Polymers"
    Alireza Torabi, Kazem Hamidi, Abdol Saleh Rahimi, Sergio Cicero
    Applied Sciences-Basel, Vol. 11, No 2104, 2021
37. "Fracture Behavior of Two Biopolymers Containing Notches: Eects of Notch Tip Plasticity"
    Sahel Shahbaz, Majid Reza Ayatollahi, Alireza Torabi, Sergio Cicero
    Applied Sciences-Basel, Vol. 10, No 23, pp.1-15, 2020
38. "On the use of the Fictitious Material Concept in estimating the ultimate load of keyhole notched AA6061-T6 specimens under large tension-torsion deformations"
    Alireza Torabi, Saeed Mohammadi, Behnam Saboori, Majid Reza Ayatollahi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. xxxx, pp.1-17, 2020
39. "Semi-analytical estimation of the effective plastic zone size at U-notch neighborhood in thin sheets under mixed mode I/ II loading"
    Alireza Torabi, Behnam Shahbazian
    ENGINEERING FRACTURE MECHANICS, Vol. 239, No 107323, 2020
40. "Fracture of U- and V-notched Al6061-T6 plates: The first examination of the Fictitious Material Concept under mixed mode I/III loading"
    Alireza Torabi, Behnam Saboori, Ali Ghelich
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 109, No 102766, 2020
41. "Out-of-plane ductile failure of notch: Evaluation of Equivalent Material Concept"
    Alireza Torabi, Behnam Saboori, Mohammad Reza Kamjoo
    STRUCTURAL ENGINEERING AND MECHANICS, Vol. 75, No 5, pp.559-569, 2020
42. "Experimental verification of the virtual isotropic material concept for the last-ply-failure of U-notched quasiisotropic E-glass/epoxy composite laminates under tension-shear loading"
    Alireza Torabi, Ebrahim Pirhadi
    Journal of Industrial Textiles, 2020
43. "Evaluation of the equivalent material concept in mixed mode I/III fracture estimation of V-notched Al7075-T6 plates"
    Behnam Saboori, Alireza Torabi, Mohammad Reza Kamjoo
    ENGINEERING FRACTURE MECHANICS, Vol. 237, No 107259, 2020
44. "Limit curves for brittle fracture in key-hole notches under mixed mode I/III loading based on stress-based criteria"
    Faezeh Hatami, Majid Reza Ayatollahi, Alireza Torabi
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 85, No 104089, 2020
45. "Mixed mode notch fracture toughness assessment of quasi-brittle polymeric specimens at different scales"
    Alireza Torabi, Mahdi Jabbari, Javad Akbardoost
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 109, No 102682, 2020
46. "Scaling effects on notch fracture toughness of graphite specimens under mode I loading"
    Alireza Torabi, Mahdi Jabbari, Javad Akbardoost
    ENGINEERING FRACTURE MECHANICS, Vol. 235, No 107153, 2020
47. "Notch tip plastic zone determination by extending Irwin’s model"
    Alireza Torabi, Behnam Shahbazian
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 108, No 102643, 2020
48. "Fracture Load Predictions in Short Glass Fiber Reinforced Polyamide 6 U-Notched Specimens Combining the Equivalent Material Concept and the Theory of Critical Distances"
    Sergio Cicero, Alireza Torabi, F.T. Ibanez-Gutierrez, Peyman Azizi
    JOURNAL OF TESTING AND EVALUATION, Vol. 48, No 2, pp.1226-1251, 2020
49. "Using the Equivalent Material Concept and the Average Strain Energy Density to Analyse the Fracture Behaviour of Structural Materials"
    Sergio Cicero, Juan Diego Fuentes, Alireza Torabi
    Applied Sciences-Basel, Vol. 10, pp.1-13, 2020
50. "Implementation of XFEM for fracture prediction of VO-notched brittle specimens"
    Alireza Torabi, Hamid Reza Majidi, Hossein Amani, Javad Akbardoost
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 81, 2020
51. "Elastic-plastic damage prediction in notched epoxy resin specimens under mixed mode I/II loading using two virtual linear elastic failure criteria"
    Abdol Saleh Rahimi, Majid Reza Ayatollahi, Alireza Torabi
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. xxxx, 2020
52. "In-situ brittle fracture analysis of sharp V-notched components using digital image correlation"
    Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 106, No 1, 2020
53. "On the use of digital image correlation method for determining the stress field at blunt V-notch neighborhood"
    Alireza Torabi, Bahador Bahrami, Majid Reza Ayatollahi
    ENGINEERING FRACTURE MECHANICS, Vol. 223, No 1, 2019
54. "Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion"
    Alireza Torabi, Mohammad Hassan Kalantari, Mohammad Reza Mohammad Aliha, Seyed Mohammad Navid Ghoreishi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, No 2, 2019
55. "ON SUITABILITY OF THE AVERAGED STRAIN ENERGY DENSITY CRITERION IN PREDICTING MIXED MODE I/II BRITTLE FRACTURE OF BLUNT V-NOTCHES WITH NEGATIVE MODE I CONTRIBUTIONS"
    Alireza Torabi, Seyed Mohammad Javad Razavi, Filippo Berto, Majid Reza Ayatollahi
    STRENGTH OF MATERIALS, Vol. 51, No 5, pp.770-785, 2019
56. "Out-of-plane shear fracture analysis of PMMA and GPPS polymers weakened by round-tip V-notches"
    Behnam Saboori, Alireza Torabi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, No 1, 2019
57. "Failure analysis of round-tip V-notched laminated composite plates under mixed mode I/II loading"
    Alireza Torabi, Ebrahim Pirhadi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 104, No 3, 2019
58. "Application of digital image correlation method for determination of mixed mode stress intensity factors in sharp notches"
    Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
    OPTICS AND LASERS IN ENGINEERING, Vol. 124, No 1, 2019
59. "Extension of the virtual isotropic material concept to mixed mode I/II loading for predicting the last-ply-failure of U-notched glass/epoxy laminated composite specimens"
    Alireza Torabi, Ebrahim Pirhadi
    COMPOSITES PART B-ENGINEERING, Vol. 176, No 1, 2019
60. "Crack growth onset in thin aluminum sheets under mixed mode I/II loading: A new form of the Equivalent Material Concept"
    Alireza Torabi, Majid Reza Ayatollahi, Mohammad Torabi, Abdol Saleh Rahimi
    THIN-WALLED STRUCTURES, Vol. 144, No 1, 2019
61. "Elastic-plastic fracture assessment of CNT-reinforced epoxy/nanocomposite specimens weakened by U-shaped notches under mixed mode loading"
    Alireza Torabi, Abdol Saleh Rahimi, Majid Reza Ayatollahi
    COMPOSITES PART B-ENGINEERING, Vol. 176, No 1, 2019
62. "On the ability of the notch fracture mechanics in predicting the last-ply-failure of blunt V-notched laminated composite specimens: A hard problem can be easily solved by conventional methods"
    Alireza Torabi, Ebrahim Pirhadi
    ENGINEERING FRACTURE MECHANICS, Vol. 217, No 1, 2019
63. "J‐integral evaluation for V‐notched ductile plates subjected to tension"
    Alireza Torabi, Hamid Reza Majidi, Mahmood Zabihi
    Material Design & Processing Communications, Vol. 1, No 1, 2019
64. "Finite Fracture Mechanics Assessment in Moderate and Large Scale Yielding Regimes"
    Alireza Torabi, Filippo Berto, Alberto Sapora
    Metals, Vol. 9, No 5, pp.1-10, 2019
65. "Experimental determination of the notch stress intensity factor for sharp Vnotched specimens by using the digital image correlation method"
    Alireza Torabi, Bahador Bahrami, Majid Reza Ayatollahi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 103, No 2, 2019
66. "Notch failure in laminated composites under opening mode: The Virtual Isotropic Material Concept"
    Alireza Torabi, Ebrahim Pirhadi
    COMPOSITES PART B-ENGINEERING, Vol. 172, No 1, pp.61-75, 2019
67. "Mixed mode I/II crack growth investigation for bi-metal FSW aluminum alloy AA7075-T6/pure copper joints"
    Mohammad Reza Mohammad Aliha, Mohammad Hassan Kalantari, Seyed Mohammad Navid Ghoreishi, Alireza Torabi, Siavash Etesam
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 103, 2019
68. "Energy-based ductile failure predictions in cracked friction-stir welded joints"
    Hamid Reza Majidi, Alireza Torabi, Mahmood Zabihi, Seyed Mohammad Javad Razavi, Filippo Berto
    ENGINEERING FAILURE ANALYSIS, Vol. 102, No 1, pp.327-337, 2019
69. "Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis"
    Hamid Reza Fattahi Amirdehi, Mohammad Reza Mohammad Aliha, Ali Moniri, Alireza Torabi
    CONSTRUCTION AND BUILDING MATERIALS, Vol. 213, No 1, pp.483-491, 2019
70. "Application of the equivalent material concept to the study of the ductile failure due to U-notches"
    Fernando Javier Gomez, Alireza Torabi
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, Vol. 172, pp.65-69, 2019
71. "Experimental verification of the Fictitious Material Concept for tensile fracture in short glass fibre reinforced polyamide 6 notched specimens with variable moisture"
    Alireza Torabi, Hamid Reza Majidi, Sergio Cicero, F.T. Ibanez Gutierrez, Juan Diego Fuentes
    ENGINEERING FRACTURE MECHANICS, Vol. 212, pp.95-105, 2019
72. "Mixed mode I/II failure prediction of thin U-notched ductile steel plates with significant strain-hardening and large strain-to-failure: The Fictitious Material Concept"
    Alireza Torabi, Mohsen Kamyab
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 75, pp.225-236, 2019
73. "Pure mode III fracture of U-notched specimens made of PMMA and GPPS polymers: Experimental and theoretical evaluations"
    Alireza Torabi, Behnam Saboori, Ali Hashemi
    ENGINEERING FRACTURE MECHANICS, Vol. 211, pp.70-81, 2019
74. "The fictitious material concept"
    Alireza Torabi, Mohsen Kamyab
    ENGINEERING FRACTURE MECHANICS, Vol. 209, pp.17-31, 2019
75. "Mixed mode І/ІІ fracture prediction of blunt V-notched nanocomposite specimens with nonlinear behavior by means of the Equivalent Material Concept"
    Alireza Torabi, Abdol Saleh Rahimi, Majid Reza Ayatollahi
    COMPOSITES PART B-ENGINEERING, Vol. 154, pp.363-373, 2018
76. "Fracture study in notched graphite specimens subjected to mixed mode I/II loading: Application of XFEM based on the cohesive zone model"
    Alireza Torabi, Hamid Reza Majidi, Majid Reza Ayatollahi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 99, pp.60-70, 2018
77. "Brittle failure of PMMA in the presence of blunt V-notches under combined tension-tear loading: Experiments and stress-based theories"
    Alireza Torabi, Behnam Saboori, Saber Keshavarz Mohammadian, Majid Reza Ayatollahi
    POLYMER TESTING, Vol. 72, pp.94-109, 2018
78. "Notch ductile failure with significant strain‐hardening: The modified equivalent material concept"
    Alireza Torabi, Mohsen Kamyab
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 42, No 2, pp.439-453, 2018
79. "Predicting the fracture trajectory in U, VO, and key-hole notched specimens using an incremental approach"
    Javad Akbardoost, Alireza Torabi, Hossein Amani
    ENGINEERING FRACTURE MECHANICS, Vol. 200, pp.189-207, 2018
80. "Ductile failure analysis of blunt V-notched epoxy resin plates subjected to combined tension-shear loading"
    Abdol Saleh Rahimi, Majid Reza Ayatollahi, Alireza Torabi
    POLYMER TESTING, Vol. 70, pp.57-66, 2018
81. "Application of EMC‐J criterion to fracture prediction of U‐ notched polymeric specimens with nonlinear behaviour"
    Hamid Reza Majidi, Seyyed Mohammad Javad Razavi, Alireza Torabi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 42, No 1, pp.352-362, 2018
82. "Mode III notch fracture toughness assessment for various notch features"
    Alireza Torabi, Behnam Saboori, Majid Reza Ayatollahi
    Physical Mesomechanics, Vol. 21, No 4, pp.320-332, 2018
83. "Energy-based assessment of brittle fracture in VO-notched polymer specimens under combined compression-shear loading conditions"
    Hamid Reza Majidi, Majid Reza Ayatollahi, Alireza Torabi, Ashkan Zaheri
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, pp.1-16, 2018
84. "Experimental and stress-based theoretical studies on mixed mode I/III fracture of round-tip V-notched Polystyrene specimens"
    Behnam Saboori, Alireza Torabi, Saber Keshavarz Mohammadian
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 95, pp.283-305, 2018
85. "J-integral expression for mixed mode I/II ductile failure prediction of U-notched Al 6061-T6 plates under large-scale yielding regime"
    Hamid Reza Majidi, Alireza Torabi, Mohammad Esmaeil Golmakani
    ENGINEERING FRACTURE MECHANICS, Vol. 195, pp.253-266, 2018
86. "Compressive brittle fracture prediction in blunt V-notched PMMA specimens by means of the strain energy density approach"
    Alireza Torabi, Majid Reza Ayatollahi, Marco Colussi
    Physical Mesomechanics, Vol. 21, No 2, pp.104-109, 2018
87. "Fracture analysis of dissimilar Al‐Al friction stir welded joints under tensile/shear loading"
    Alireza Torabi, Mohammad Hassan Kalantari, Mohammad Reza Mohammad Aliha
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 41, No 9, pp.2040-2053, 2018
88. "Finite fracture mechanics crack initiation from a circular hole"
    Alberto Sapora, Alireza Torabi, Siavash Etesam, Pietro Cornetti
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 41, No 7, pp.1627-1636, 2018
89. "Fracture study in notched ductile polymeric plates subjected to mixed mode I/II loading: Application of equivalent material concept"
    Abdol Saleh Rahimi, Majid Reza Ayatollahi, Alireza Torabi
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 70, pp.37-43, 2018
90. "On combination of the equivalent material concept and J-integral criterion for ductile failure prediction of U-notches subjected to tension"
    Hamid Reza Majidi, Mohammad Esmaeil Golmakani, Alireza Torabi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 4, No 7, pp.1476-1487, 2018
91. "Averaged strain energy density to assess mixed mode I/III fracture of U-notched GPPS samples"
    Behnam Saboori, Alireza Torabi, Filippo Berto, Seyyed Mohammad Javad Razavi
    STRUCTURAL ENGINEERING AND MECHANICS, Vol. 65, No 6, pp.699-706, 2018
92. "Estimation of Fracture Loads in AL7075-T651 Notched Specimens Using the Equivalent Material Concept Combined with the Strain Energy Density Criterion and with the Theory of Critical Distances"
    Juan Diego Fuentes, Sergio Cicero, Filippo Berto, Alireza Torabi, Virginia Madrazo, Peyman Azizi
    Metals, Vol. 87, No 8, pp.1-18, 2018
93. "Fracture study of a ductile polymer-based nanocomposite weakened by blunt V-notches under mode I loading: Application of the Equivalent Material Concept"
    Alireza Torabi, Abdol Saleh Rahimi, Majid Reza Ayatollahi
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 94, pp.26-33, 2018
94. "Tensile fracture analysis of a ductile polymeric material weakened by Unotches"
    Alireza Torabi, Abdol Saleh Rahimi, Majid Reza Ayatollahi
    POLYMER TESTING, Vol. 64, pp.117-126, 2017
95. "On the use of the extended finite element and incremental methods in brittle fracture assessment of key-hole notched polystyrene specimens under mixed mode I/II loading with negative mode I contributions"
    Hamid Reza Majidi, Majid Reza Ayatollahi, Alireza Torabi
    ARCHIVE OF APPLIED MECHANICS, Vol. xxxx, pp.1-26, 2017
96. "Experimental and theoretical investigation of mixed mode I/III brittle fracture of U-notched polystyrene components"
    Alireza Torabi, Behnam Saboori
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. xxxx, pp.1-11, 2017
97. "Size effects on brittle fracture of Brazilian disk samples containing a circular hole"
    Alireza Torabi, Siavash Etesam, Alberto Sapora, Pietro Cornetti
    ENGINEERING FRACTURE MECHANICS, Vol. 186, pp.496-503, 2017
98. "Prediction of fracture loads in PMMA U‐notched specimens using the equivalent material concept and the theory of critical distances combined criterion"
    Sergio Cicero, Alireza Torabi, Virginia Madrazo, Peyman Azizi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. xxxx, 2017
99. "Averaged strain energy density criterion to predict ductile failure of U-notched Al 6061-T6 plates under mixed mode loading"
    Alireza Torabi, Filippo Berto, Alberto Campagnolo, Javad Akbardoost
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 91, pp.86-93, 2017
100. "Predictions of fracture load, crack initiation angle, and trajectory for V-notched Brazilian disk specimens under mixed mode I/II loading with negative mode I contributions"
     Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 41, No 3, pp.688-699, 2017
101. "Tensile failure in blunt V-notched ductile members: A new formulation of the Equivalent Material Concept"
     Alireza Torabi
     ENGINEERING FRACTURE MECHANICS, Vol. 184, pp.1-13, 2017
102. "Tensile failure prediction of U-notched plates under moderate-scale and large-scale yielding regimes"
     Alireza Torabi, Filippo Berto, Seyyed Mohammad Javad Razavi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. xxxx, 2017
103. "LARGE-SCALE YIELDING FAILURE PREDICTION OF NOTCHED DUCTILE PLATES BY MEANS OF THE LINEAR ELASTIC NOTCH FRACTURE MECHANICS"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     STRENGTH OF MATERIALS, Vol. 49, No 2, pp.224-233, 2017
104. "Experimental verification of two stress-based criteria for mixed mode I/III brittle fracture assessment of U-notched components"
     Behnam Saboori, Alireza Torabi, Majid Reza Ayatollahi, Filippo Berto
     ENGINEERING FRACTURE MECHANICS, Vol. 182, pp.229-244, 2017
105. "Ductile failure prediction of thin notched aluminum plates subjected to combined tension-shear loading"
     Alireza Torabi, Filippo Berto, Seyyed Mohammad Javad Razavi
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. xxxx, 2017
106. "Static Strength of V-Notches With End Holes Under Combined Tension-Shear Loading: Experimental Measurement by the Disk Test and Theoretical Prediction by the Local Energy"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     JOURNAL OF TESTING AND EVALUATION, Vol. 45, No 3, pp.732-743, 2017
107. "Mixed mode I/II crack initiation from U-notches in Al 7075-T6 thin plates by large-scale yielding regime"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 86, No 1, pp.284-291, 2016
108. "Comprehensive notch shape factors for V-notched Brazilian disk specimens loaded under mixed mode I/II from pure opening mode to pure closing mode"
     Majid Reza Ayatollahi, Alireza Torabi, Bahador Bahrami
     ARCHIVE OF APPLIED MECHANICS, Vol. 87, No 2, pp.1-15, 2016
109. "Brittle failure of key-hole notches under mixed mode I/II loading with negative mode I contributions"
     Alireza Torabi, Hamid Reza Majidi, Majid Reza Ayatollahi
     ENGINEERING FRACTURE MECHANICS, Vol. 168, No 1, pp.51-72, 2016
110. "Large plasticity induced crack initiation from U-notches in thin aluminum sheets under mixed mode loading"
     Alireza Torabi, Behrooz Mohammad Hosseini
     Engineering Solid Mechanics, Vol. 5, No 1, pp.39-60, 2016
111. "A successful combination of the equivalent material concept and the averaged strain energy density criterion for predicting crack initiation from blunt V-notches in ductile aluminum plates under mixed mode loading"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     Physical Mesomechanics, Vol. 19, No 4, pp.382-391, 2016
112. "Evaluation of the load-carrying capacity of notched ductile plates under mixed mode loading"
     Alireza Torabi, Mohammad Keshavarzian
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 85, No 1, pp.375-386, 2016
113. "Mixed mode I/II brittle fracture in V-notched Brazilian disk specimens under negative mode I conditions"
     Alireza Torabi, Bahador Bahrami, Majid Reza Ayatollahi
     Physical Mesomechanics, Vol. 19, No 3, pp.332-348, 2016
114. "Tensile fracture analysis of key-hole notches by means of the strain energy density"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     STRENGTH OF MATERIALS, Vol. 48, No 2, pp.259-269, 2016
115. "Mixed mode I/III brittle fracture in round-tip V-notches"
     Behnam Saboori, Majid Reza Ayatollahi, Alireza Torabi, Filippo Berto
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 83, pp.135-151, 2016
116. "Elastic-plastic fracture analysis of notched Al 7075-T6 plates by means of the local energy combined with the equivalent material concept"
     Alireza Torabi, Filippo Berto, Alberto Campagnolo
     Physical Mesomechanics, Vol. 19, No 2, pp.204-214, 2016
117. "Mode II Brittle Fracture Assessment of Key-Hole Notches by Means of the Local Energy"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     JOURNAL OF TESTING AND EVALUATION, Vol. 44, No 3, pp.1261-1270, 2016
118. "Tensile crack initiation from a blunt V-notch border in ductile plates in the presence of large plasticity at the notch vicinity"
     Alireza Torabi, Mohammad Keshavarzian
     International Journal of Terraspace Science and Engineering, Vol. 8, No 1, pp.93-101, 2016
119. "Application of the equivalent material concept to ductile failure prediction of blunt V-notches encountering moderate-scale yielding"
     Alireza Torabi, Mehran Alaei
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. xxxx, 2016
120. "On the necessity of using critical distance model in mixed mode brittle fracture prediction of V-notched Brazilian disk specimens under negative mode І conditions"
     Majid Reza Ayatollahi, Alireza Torabi, Bahador Bahrami
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. xxxx, 2016
121. "Brittle fracture assessment of engineering components in the presence of notches: a review"
     Majid Reza Ayatollahi, Alireza Torabi, Abdol Saleh Rahimi
     FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 39, No 3, pp.267-291, 2015
122. "Investigation of ductile rupture in U-notched Al 6061-T6 plates under mixed mode loading"
     Alireza Torabi, Rasool Habibi
     FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 39, No 5, pp.551-565, 2015
123. "Mixed-mode ductile failure analysis of V-notched Al 7075-T6 thin sheets"
     Alireza Torabi, Mehran Alaei
     ENGINEERING FRACTURE MECHANICS, Vol. 150, No 150, pp.70-95, 2015
124. "On the Ability of the Equivalent Material Concept in Predicting Ductile Failure of U-Notches under Moderate- and Large-Scale Yielding Conditions"
     Alireza Torabi, Rasool Habibi, Behrooz Mohammad Hosseini
     Physical Mesomechanics, Vol. 18, No 4, pp.337-347, 2015
125. "Combined tension–shear fracture analysis of V-notches with end holes"
     Rozbeh Riazi, Alireza Torabi, Shahab Amininejad, Mohammad Hossein Sabour
     ACTA MECHANICA, Vol. 226, No 11, 2015
126. "Brittle fracture analysis of blunt V-notches under compression"
     Alireza Torabi, Mostafa Firoozabadi, Majid Reza Ayatollahi
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 67-68, pp.219-230, 2015
127. "Tensile fracture analysis of V-notches with end holes by means of the local energy"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     Physical Mesomechanics, Vol. 18, No 3, pp.194-202, 2015
128. "Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     MATERIALS & DESIGN, Vol. 69, No 1, pp.22-29, 2015
129. "Mode II notch fracture toughness measurement for key-hole notches by the disk test"
     Alireza Torabi, Seyyed Mostafa Abedinasab
     JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 50, No 4, pp.264-275, 2015
130. "Experimental and theoretical investigation of brittle fracture in key-hole notches under mixed mode I/II loading"
     Alireza Torabi, Alberto Campagnolo, Filippo Berto
     ACTA MECHANICA, Vol. 226, No 7, pp.2313-2322, 2015
131. "Fracture assessment of VO-notches under mode II loading: Experiments and theories"
     Alireza Torabi, Shahab Amininejad
     THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 75, No 1, pp.59-69, 2015
132. "Theoretical and experimental investigation of brittle fracture in V-notched PMMA specimens under compressive loading"
     Majid Reza Ayatollahi, Alireza Torabi, Mostafa Firoozabadi
     ENGINEERING FRACTURE MECHANICS, Vol. 135, No 1, pp.187-205, 2015
133. "Brittle fracture in key-hole notches under mixed mode loading: Experimental study and theoretical predictions"
     Alireza Torabi, Seyyed Mostafa Abedinasab
     ENGINEERING FRACTURE MECHANICS, Vol. 134, No 1, pp.35-53, 2015
134. "Fracture assessment of graphite V-notched and U-notched specimens by using the cohesive crack model"
     David A. Cendon, Alireza Torabi, Manuel Elices
     FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 38, No 5, pp.563-573, 2014
135. "Closed-form expressions of mode I apparent notch fracture toughness for key-hole notches"
     Alireza Torabi
     JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 49, No 8, pp.583-591, 2014
136. "Fracture Study on Key-Hole Notches Under Tension: Two Brittle Fracture Criteria and Notch Fracture Toughness Measurement by the Disk Test"
     Alireza Torabi, Seyyed Mostafa Abedinasab
     EXPERIMENTAL MECHANICS, Vol. ****, 2014
137. "Strain energy density to assess mode II fracture in U-notched disk-type graphite plates"
     Alireza Torabi, Filippo Berto
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 23, No 7, pp.917-930, 2014
138. "Pure shear fracture study in a brittle graphite material containing a U-notch"
     Alireza Torabi, Mehdi Fakoorsaghieh, Mohammadali Darbani
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 23, No 6, pp.839-854, 2014
139. "Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading"
     Alireza Torabi, Ebrahim Pirhadi
     EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 49, No 1, pp.1-12, 2014
140. "Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy"
     Alireza Torabi, Filippo Berto
     STRUCTURAL ENGINEERING AND MECHANICS, Vol. 50, No 6, pp.723-740, 2014
141. "Brittle fracture in V-notches with end holes"
     Alireza Torabi, Shahab Amininejad
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. ****, 2014
142. "Notch Fracture Toughness Evaluation for a Brittle Graphite Material"
     Alireza Torabi, Filippo Berto
     Materials Performance and Characterization, Vol. 3, No 3, pp.1-16, 2014
143. "Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading"
     Alireza Torabi, Mehdi Fakoorsaghieh, Ebrahim Pirhadi
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 51, No 6, pp.1287-1298, 2013
144. "Compressive brittle fracture in V-notches with end holes"
     Alireza Torabi, Majid Reza Ayatollahi
     EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 45, No 1, pp.32-40, 2013
145. "Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density"
     Alireza Torabi, Filippo Berto
     STRENGTH OF MATERIALS, Vol. 45, No 6, pp.635-647, 2013
146. "The Equivalent Material Concept: Application to failure of O-notches"
     Alireza Torabi
     Engineering Solid Mechanics, Vol. 1, No 4, pp.129-140, 2013
147. "Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch"
     Alireza Torabi, Mehdi Fakoorsaghieh, Ebrahim Pirhadi
     ENGINEERING FRACTURE MECHANICS, Vol. 111, No 1, pp.77-85, 2013
148. "Failure curves for predicting brittle fracture in V-notched structural components loaded under mixed tension/shear: An advanced engineering design package"
     Alireza Torabi
     Engineering Solid Mechanics, Vol. 1, No 3, pp.99-118, 2013
149. "Wide range brittle fracture curves for U-notched components based on UMTS model"
     Alireza Torabi
     Engineering Solid Mechanics, Vol. 1, No 2, pp.57-68, 2013
150. "Determination of permissible defect size for solid axles loaded under fully-reversed rotating bending"
     Alireza Torabi, Mohammad Reza Mohammad Aliha
     Engineering Solid Mechanics, Vol. 1, No 1, pp.27-36, 2013
151. "Fracture Assessment of U-Notched Graphite Plates Under Tension"
     Alireza Torabi
     INTERNATIONAL JOURNAL OF FRACTURE, Vol. 181, No 2, pp.285-292, 2013
152. "Sudden Fracture from U-Notches in Fine-Grained Isostatic Graphite Under Mixed Mode I/II Loading"
     Alireza Torabi
     INTERNATIONAL JOURNAL OF FRACTURE, Vol. 181, No 2, pp.309-316, 2013
153. "Ultimate Bending Strength Evaluation of U-Notched Ductile Steel Samples Under Large-Scale Yielding Conditions"
     Alireza Torabi
     INTERNATIONAL JOURNAL OF FRACTURE, Vol. 180, No 2, pp.261-268, 2013
154. "Fatigue Crack Growth in a Solid Circular Shaft Under Fully Reversed Rotating Bending"
     Alireza Torabi, M Heidary Khavas
     Journal of Failure Analysis and Prevention, Vol. 12, No 4, pp.419-426, 2012
155. "Estimation of tensile load - bearing capacity of ductile metallic materials weakened by a V - notch : The equivalent material concept"
     Alireza Torabi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 536, pp.249-255, 2012
156. "Comprehensive data for rapid calculation of notch stress intensity factors in U - notched Brazilian disc specimen under tensile - shear loading"
     Alireza Torabi, Mohamad Reza Jafarinezhad
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 541, No 15, pp.153-142, 2012
157. "Extensive data of notch shape factors for V - notched Brazilian disc specimen under mixed mode loading"
     Alireza Torabi, Morteza Taherkhanib
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, pp.8599-8609, 2011
158. "Failure assessment of notched polycrystalline graphite under tensile - shear loading"
     Majid Reza Ayatollahi , Alireza Torabi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, No 18, pp.5685-5695, 2011
159. "بررسی تجربی و تئوری چقرمگی شکست مود 2 خالص برای قطعات نرم ترکدار با کرنش - سختی بالا"
     هادی صادقیان، مجیدرضا آیت الهی، علیرضا ترابی
     نشریه مهندسی مکانیک دانشگاه امیرکبیر، نسخه xxxx، 1400
160. "شکست ترد در نمونه های پلیمری دارای شیار کلیدی شکل تحت بارگذاری مرکب فشاری- برشی"
     مجیدرضا آیت الهی، علیرضا ترابی، حمیدرضا مجیدی
     نشریه مهندسی مکانیک دانشگاه امیرکبیر، نسخه 50، شماره 5، صفحات:927-942، 1397
161. "پیش بینی مسیر رشد ترک در نمونه ی پلیمری دارای شیار V شکل تحت بارگذاری مرکب برشی- فشاری"
     علیرضا ترابی، بهادر بهرامی، مجیدرضا آیت الهی
     نشریه علمی پژوهشی علوم و فناوری کامپوزیت، نسخه 4، صفحات:337-346، 1396
162. "پیش بینی شکست صفحات گرافیتی دارای شیار کلیدی شکل با استفاده از معیار چگالی انرژی کرنشی مبتنی بر مفهوم ضریب معادل"
     علیرضا ترابی، حمیدرضا مجیدی، مجیدرضا آیت الهی
     مکانیک سازه ها و شاره ها، نسخه 7، شماره 2، صفحات:1-15، 1396
163. "بررسی مسیر گسترش ترک در شیارهای V شکل نوک گرد تحت بارگذاری مرکب I/II"
     جواد اکبردوست، سید محمدحسین مهاجرانی، علیرضا ترابی
     مهندسی مکانیک مدرس، نسخه 16، شماره 3، صفحات:161-172، 1394
164. "پیش بینی شکست شیارهای V شکل با سوراخ انتهایی تحت بارگذاری مرکب کششی - برشی با استفاده از معیار چگالی انرژی کرنشی"
     علیرضا ترابی، شهاب امینی نژاد، فیلیپو برتو
     مهندسی مکانیک مدرس، نسخه *، 1394
165. "تحلیل تجربی و تئوری شکست قطعات پلیمری شبه ترد دارای شیار V شکل با سوراخ انتهایی تحت بارگذاری مرکب کششی/ برشی"
     علیرضا ترابی، شهاب امینی نژاد
     نشریه علمی پژوهشی علوم و فناوری کامپوزیت، نسخه 2، شماره 2، 1394

مقالات علمی ارائه شده در همایش‌ها

1. "On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior"
   Sergio Cicero, Alireza Torabi, Hamid Reza Majidi, Fernando Javier Gomez
   1st Virtual European Conference on Fracture, 2020
2. "An extension of the Equivalent Material Concept applied to fracture of U-notched solids"
   Fernando Javier Gomez, Sergio Cicero, Alireza Torabi
   1st Virtual European Conference on Fracture, 2020
3. "Application of the Fictitious Material Concept and the Theory of Critical Distances in the fracture analysis of SGFR-PA6 SENB specimens containing U-notches and different moisture contents"
   Sergio Cicero, Juan Diego Fuentes, F.T. Ibanez-Gutierrez, Virginia Madrazo, Alireza Torabi, Hamid Reza Majidi
   5th Iberian Conference on Structural Integrity (IbCSI 2020), 2020
4. "NOTCH STRENGTH EVALUATION OF POLYMERIC BONE CEMENT WITH NONLINEAR BEHAVIOR"
   Majid Reza Ayatollahi, Alireza Torabi, Sahel Shahbaz
   5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 2019
5. "Study of the Validity of the Equivalent Material Concept in Prediction of Components Weakened by U-notches"
   Fernando Javier Gomez, Manuel Ispizua, Sergio Cicero, Alireza Torabi
   Congress of Espanian Fracture Group, 2019
6. "CRACK EXTENSION IN THIN AL 6061-T6 SHEETS UNDER MIXED MODE I/II LOADING"
   Majid Reza Ayatollahi, Alireza Torabi, Mohammad Torabi, Abdol Saleh Rahimi
   4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018 – ICAME2018, 2018
7. "Application of the equivalent material concept to fracture of Unotched solids under small scale yielding"
   Javier Gomez, Alireza Torabi
   22nd European Conference on Fracture-ECF22, 2018
8. "Brazilian disk tests: Circular holes and size effects"
   Alireza Torabi, Siavash Etesam, Alberto Sapora, Pietro Cornetti
   22nd European Conference on Fracture-ECF22, 2018
9. "APLICACIÓN DEL CONCEPTO MATERIAL EQUIVALENTE AL ESTUDIO DE LA ROTURA PRODUCIDA POR ENTALLAS EN U"
   Javier Gomez, M.a. Martin-rengel, Jesus Ruiz-hervias, Alireza Torabi
   35 Encuentro Del Grupo Espanol De Fractura, 2018
10. "Investigation of mixed mode fracture in cracked Brazilian disk specimen under compressive mode I loading"
    Majid Reza Ayatollahi, Bahador Bahrami, Alireza Torabi
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), 2018
11. "Fracture analysis of blunt V-notched PMMA under compressive-shear loading"
    Bahador Bahrami, Majid Reza Ayatollahi, Alireza Torabi
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), 2016
12. "پیش بینی تئوری و تجربی چقرمگی شکست گذرلایه ای چندلایه های کامپوزیتی حاوی شیار U شکل، تحت بارگذاری مود بازشوندگی"
    علیرضا ترابی، ابراهیم پیرهادی
    بیست و هشتمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1399
13. "بررسی تئوری و تجربی ظرفیت باربری چندلایه های کامپوزیتی حاوی شیار U شکل، تحت بارگذاری مود II خالص"
    علیرضا ترابی، ابراهیم پیرهادی
    بیست و هشتمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1399
14. "بررسی شکست ترد قطعات پلیمری شیاردار، تحت بارگذاری فشار خالص"
    علیرضا ترابی، کاظم حمیدی
    بیست و هشتمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1399
15. "بررسی شکست اتصالات جوش اصطکاکی اغتشاشی آلومینیوم به آلومینیوم تحت بارگذاری کششی¬- برشی"
    محمدحسن کلانتری، علیرضا ترابی
    هفدهمین کنفرانس انجمن هوافضای ایران، 1397
16. "پیش‌بینی مسیر رشد ترک شروع شده از شیار در قطعات تـرد، تحـت بارگـذاری ترکیبی I/II"
    حسین امانی، علیرضا ترابی، جواد اکبردوست
    هفدهمین کنفرانس انجمن هوافضای ایران، 1397
17. "استفاده از مفهوم ماده معادل در تعیین ظرفیت باربری صفحات آلومینیومی 6061 تضعیف شده با شیار"
    علیرضا ترابی، محمد کشاورزیان
    پانزدهمین کنفرانس بین المللی انجمن هوافضای ایران، 1394
18. "تخمین میزان باربری قطعات نرم دارای شیار U شکل با رفتار الاستیک- پلاستیک به کمک معیارهای ترد"
    علیرضا ترابی، رسول حبیبی
    پانزدهمین کنفرانس بین المللی انجمن هوافضای ایران، 1394
19. "بررسی شکست در شیارهای V شکل از جنس آلومینیوم آلیاژی 7075 تحت بارگذاری مد I خالص"
    علیرضا ترابی، مهران علایی
    پانزدهمین کنفرانس بین المللی انجمن هوافضای ایران، 1394
20. "بررسی آماری شکست دیسک ردیف دوم توربین واحدهای گازی TG20 و W251 در نیروگاه ری"
    علیرضا ترابی، هادی نیری
    هشتمین کنفرانس ملی نیروگاه های برق و نمایشگاه جانبی، 1394
21. "بررسی تجربی و تئوری شکست ترد در شیارهای کلیدی شکل تحت برش خالص"
    علیرضا ترابی، شهاب امینی نژاد، رضا امینی نژاد
    چهاردهمین کنفرانس بین المللی انجمن هوافضای ایران، 1393
22. "تعیین نسبت چقرمگی شکست شیار برای شیارهای V شکل با سوراخ انتهایی به دو روش تجربی و تئوری"
    علیرضا ترابی، شهاب امینی نژاد
    چهاردهمین کنفرانس بین المللی انجمن هوافضای ایران، 1393
23. "بررسی علت شکست پره روتور کمپرسور توربین گازی 32 مگاواتی به کمک شواهد میدانی و مطالعات میکروسکوپیک"
    علیرضا ترابی، رامین وطندوست
    هفتمین کنفرانس نیروگاه های برق و نمایشگاه جانبی، 1393
24. "بررسی علت شکست دیسک ردیف دوم توربین واحد گازی 32 مگاواتی نیروگاه ری"
    علیرضا ترابی، هادی نیری
    هفتمین کنفرانس نیروگاه های برق و نمایشگاه جانبی، 1393
25. "بررسی شکست ناگهانی در قطعات دارای شیار کلیدی شکل"
    علیرضا ترابی، سیدمصطفی عابدی نسب
    سیزدهمین کنفرانس انجمن هوافضای ایران، 1392
26. "مطالعه شکست ترد در قطعات گرافیتی دارای شیار کلیدی شکل تحت بارگذاری مرکب I/II"
    علیرضا ترابی، ابراهیم پیرهادی
    سیزدهمین کنفرانس انجمن هوافضای ایران، 1392
27. "شکست ترد در شیارهای V شکل با سوراخ انتهایی تحت بارگذاری مد I خالص"
    علیرضا ترابی، شهاب امینی نژاد
    سیزدهمین کنفرانس انجمن هوافضای ایران، 1392
28. "تحلیل تئوری و تجربی شکست ناگهانی در قطعات گرافیتی دارای شیار U شکل تحت کشش خالص"
    علیرضا ترابی، مهدی فکور ثقیه، ابراهیم پیرهادی
    بیست و یکمین همایش سالانه بین المللی مهندسی مکانیک ایران، 1392